An AI image with a fake transparent background: can a background remover take out a drawn checkerboard?

Drop the image here to remove the checkerboard as background. Below, how to check that the checkerboard is drawn in, and what happened when we put drawn checkerboards of four square sizes through this remover. Nothing is uploaded.

Background
QualityThe AI model (about 88MB) loads once. After that it stays on this device, and the same quality uses no data. Switching quality loads that model (about 44MB) once.

The AI runs inside your browser. Your images are never sent to a server.

You ask an AI image generator such as ChatGPT or Gemini for a picture with a transparent background, and the picture comes back with a grey-and-white checkerboard behind it. Save it and use it, and the checkerboard comes along. In that case the checkerboard is not the on-screen sign for transparency; it has been drawn into the picture. This page first shows how to check that, then what happened when we put drawn checkerboards through this site's background remover, and what to do when the pattern does not all come off. We have not checked which AI services do this, or how any of them should be asked.

First, check whether the checkerboard is drawn in

Apps and sites that make images often show transparent areas as a checkerboard on screen. That checkerboard exists only on the screen and is never saved into the file. To tell the two apart, use the test in the article on transparent backgrounds that turn white: in the image converter, choose JPEG, set Fill transparent areas with to a loud colour such as red, and drop the image in. Only the truly transparent areas take that colour. If the checkerboard is still there, it is part of the picture.

The file type does not tell you. Every image in the run below is a PNG, and none of them has a single transparent pixel.

What we tried (15 November 2026)

We drew two square images, 1024 × 1024 pixels each: an apple with an outline, and a logo, a blue square with the white word LOGO in it and a blue ring. Each was placed on a solid white background and on white-and-grey checkerboards with squares of 8, 16, 24 and 32 pixels a side: ten images in all.

All ten went into this site's background remover at once, at the Standard quality, and were saved as PNG with the background left on Transparent. We then compared the opacity of every pixel with the shape of the original drawing. A background pixel that ended up almost fully transparent (5% opacity or less) counts as gone; one that stayed at least half opaque counts as left. We ran the same ten images twice, and both runs gave the same numbers.

Small squares went, large squares stayed

The checkerboards with 8px and 16px squares came off almost exactly as well as solid white. On the apple drawing 99.7% of the background was gone and less than 0.1% left. On the logo, 99.0% (8px) and 99.3% (16px) of the background was gone.

At 24px the result dropped sharply. On the apple only 59.7% of the background was gone and 14.4% was left; at 32px, 29.7% was gone and 36.4% left. On the logo at 32px, 39.1% was gone and 30.8% left. What was left did not keep the shape of the squares: it was scattered over the whole background as fine specks.

With large squares the drawing suffered too. On the logo at 32px some of the white letters turned see-through, and only 90.9% of the logo's pixels stayed opaque (96.4% on solid white). The apple kept 99% or more of its pixels on every background.

Share of the background that was gone (almost fully transparent) and left (at least half opaque) after the background remover, 1024 × 1024 images, Standard quality.
Background drawn inApple: goneApple: leftLogo: goneLogo: left
Solid white99.7%0.0%99.8%0.0%
Checkerboard, 8px squares99.7%0.0%99.0%0.2%
Checkerboard, 16px squares99.7%0.0%99.3%0.3%
Checkerboard, 24px squares59.7%14.4%67.3%9.9%
Checkerboard, 32px squares29.7%36.4%39.1%30.8%

What matters is the square size relative to the image (worked out, not measured)

This site's background remover scales every image to 1024 × 1024 pixels, up or down, before handing it to the AI. The images above were exactly 1024 pixels, so the AI saw the squares at their real size. On a 2048-pixel image, 32px squares would look like 16px squares to it. Enlarging an image does not help, because the squares grow by the same factor. We have not tested images of any other size, so this part is worked out, not measured.

When the checkerboard does not all come off

The surer fix is to make the image again on a plain background, such as solid white, and put that through the background remover. In our run solid white came off 99.7% on the apple and 99.8% on the logo, as cleanly as the fine checkerboards or better, and a plain background does not depend on any square size. How to get a plain background out of a given AI service differs between services, and we have not checked it.

If only a little is left, paint it away with the remover's Touch up brush. With large squares, though, what is left is spread over the whole background, so you end up painting nearly all of it.

If the AI service has a setting that exports with a transparent background, using it is the least work. Whether such a setting exists, and where, depends on the service.

What this run does not tell you

We tried only our own two drawings and a white-and-grey checkerboard. The checkerboards real AI images draw differ in colour, square size and distortion from image to image, and a photo-like picture may come out differently. Only the Standard quality was tested, not High quality, and only square images 1024 pixels a side.

Frequently asked questions

I asked ChatGPT or Gemini for a transparent background and got a checkerboard. Why?

The checkerboard that stands for transparency has probably been drawn into the picture instead of the background being made transparent. A file like that can be a PNG and still have no transparent pixels at all. Choose JPEG in the image converter (/convert), set Fill transparent areas with to a loud colour and drop the image in: if the checkerboard is still there, it is drawn in. We have not checked what any AI service outputs or how it should be asked.

Can a background remover take out a drawn checkerboard?

A fine one, yes. On 1024 × 1024 images, checkerboards with 8px and 16px squares lost 99% or more of the background in the background remover on this site. With 24px squares six to seven tenths of the background went, and with 32px squares three to four tenths; the rest stayed behind as specks scattered over the whole background.

What do I do when the checkerboard does not all come off?

The surer fix is to make the image again on a plain background, such as solid white, and put that through the background remover (/remove-bg). In our run a solid white background came off 99.7% for the apple drawing and 99.8% for the logo. If only a little is left, paint it away with the remover's Touch up brush.

Does the size of the image change the result for the same square size?

On paper, yes. The background remover on this site scales every image to 1024 × 1024 pixels before the AI sees it, so 32px squares on a 2048px image look like 16px squares to it. We have only tested 1024px images, though. Enlarging an image does not help: the squares grow by the same factor.

Are my images uploaded anywhere?

No. The background remover and the image converter both work inside your browser, on your own device; neither the image nor the result is sent to a server. The background remover downloads its AI model the first time you use it. There is no account to create.

To take a background out, use thebackground remover; to check whether a file is really transparent, theimage converter. Both run in the browser.

All image troubleshooting guides